Take Assessment – ENetwork Skill Exam – CCNA Exploration: Network Fundamentals (Version 4.0) – Answers – 2011 – 2012

Download enetwork-skill-exam-ccna-1.pkt file Note: s2/0 change to s0/0/0
Network Diagram, IP address = 122.22.0.0/22
A given network as in the diagram above, you need to perform the following tasks:
Section 1: Using VLSM to create the IP address plan
- LAN1: 310 host addresses
- LAN2: 200 host addresses
- LAN3: 60 host addresses
- LAN4: 40 host addresses
- Loopback1: 30 host addresses
- Loopback2: 10 host addresses
- Wan link: 2 host addresses
Network | Address | Mask | Des Mask |
LAN1 | 122.22.0.0 | /23 | 255.255.254.0 |
LAN2 | 122.22.2.0 | /24 | 255.255.255.0 |
LAN3 | 122.22.3.0 | /26 | 255.255.255.192 |
LAN4 | 122.22.3.64 | /26 | 255.255.255.192 |
Loopback1 | 122.22.3.128 | /27 | 255.255.255.224 |
Loopback2 | 122.22.3.160 | /28 | 255.255.255.240 |
Wan link | 122.22.3.176 | /30 | 255.255.255.252 |
In each network, assign ip address follow this order
Address for interfaces of networking device (router’s interface) +1
Note: Address for interfaces of networking device with WAN link: router1 +1; router2 +2
- Address for servers WEB, DHCP: +2
- Address for servers MAIL, DNS: +3
- Address for servers FTP, TFTP: +4
- Address for PC clients
- PC4: +4
- PC5: +5
- PC6: +6
- Router’s interface: 192.168.1.129
- WEB server: 192.168.1.130
- MAIL server: 192.168.1.131
- TFTP server: 192.168.1.132
- PC6 client: 192.168.1.134
PC/Server | IP address | Subnet mask | Default gateway | DNS Server |
LAN1 | ||||
Web www.cisco.com | 122.22.0.2 | 255.255.254.0 | 122.22.0.1 | 122.22.0.3 |
DNS | 122.22.0.3 | 255.255.254.0 | 122.22.0.1 | 122.22.0.3 |
TFTP | 122.22.0.4 | 255.255.254.0 | 122.22.0.1 | 122.22.0.3 |
LAN2 | ||||
DHCP | 122.22.2.2 | 255.255.255.0 | 122.22.2.1 | 122.22.0.3 |
PC0 | DHCP | |||
PC1 | ||||
PC2 | ||||
PC3 | ||||
LAN3 | ||||
PC4 | 122.22.3.4 | 255.255.255.192 | 122.22.3.1 | 122.22.0.3 |
PC5 | 122.22.3.5 | 255.255.255.192 | 122.22.3.1 | 122.22.0.3 |
PC6 | 122.22.3.6 | 255.255.255.192 | 122.22.3.1 | 122.22.0.3 |
LAN4 | ||||
Web www.test.com | 122.22.3.66 | 255.255.255.192 | 122.22.3.65 | 122.22.0.3 |
Mail bkacad.com | 122.22.3.67 | 255.255.255.192 | 122.22.3.65 | 122.22.0.3 |
ftp.test.com | 122.22.3.68 | 255.255.255.192 | 122.22.3.65 | 122.22.0.3 |
Router1 | ||||
fa0/0 | 122.22.0.1 | 255.255.254.0 | ||
fa1/0 | 122.22.2.1 | 255.255.255.0 | ||
loopback1 | 122.22.3.129 | 255.255.255.224 | ||
s2/0 | 122.22.3.177 | 255.255.255.252 | ||
Router2 | ||||
fa0/0 | 122.22.3.1 | 255.255.255.192 | ||
fa1/0 | 122.22.3.65 | 255.255.255.192 | ||
loopback2 | 122.22.3.161 | 255.255.255.240 | ||
s2/0 | 122.22.3.178 | 255.255.255.252 |
Note: You need accuracy, distinguish capital letters and lowercase letters (for ex: bannermotd of router 1: router1, not Router1)
Basic router/switch configurations:
Hostnames: Assign the Routers names R1, R2.
Passwords & Banner Message: (Routers only).
- Console and VTY lines and password, password=’class’.
- Set the privileged mode password: enable password=’class’, enable secret password=’cisco’.
- Banner contains the name of device: router1, router2. (type ‘#router1#’)
- Assign IP addresses and subnet masks
- Use the clock rate 64000
- Create descriptions, Interface description:
R1-f0/0 | connect to lan1 |
R1-f1/0 | connect to lan2 |
R2-f0/0 | connect to lan3 |
R2-f1/0 | connect to lan4 |
R1-loopback1 | loopback1 |
R2-loopback2 | loopback2 |
R1-s2/0 | connect to r2 |
R2-s2/0 | connect to r1 |
- R1: (config)# ip route 0.0.0.0 0.0.0.0 s2/0
- R2: (config)# ip route 0.0.0.0 0.0.0.0 s2/0
Router1 | Router2 |
hostname | |
(config)#hostname R1 | (config)#hostname R2 |
console password | |
(config)#line console 0 (config-line)#password class (config-line)#login (config-line)#exit |
|
VTY password | |
(config)#line vty 0 4 (config-line)#password class (config-line)#login (config-line)#exit |
|
privileged mode password | |
(config)#enable password class (config)#enable secret cisco |
|
bannermotd | |
(config)#banner motd #router1# | (config)#banner motd #router2# |
fa0/0 interface | |
(config)#interface fastEthernet 0/0 (config-if)#ip address 122.22.0.1 255.255.254.0 (config-if)#description connect to lan1 (config-if)#no shutdown (config-if)#exit |
(config)#interface fastEthernet 0/0 (config-if)#ip address 122.22.3.1 255.255.255.192 (config-if)#description connect to lan3 (config-if)#no shutdown (config-if)#exit |
fa1/0 interface | |
(config)#interface fastEthernet 1/0 (config-if)#ip address 122.22.2.1 255.255.255.0 (config-if)#description connect to lan2 (config-if)#no shutdown (config-if)#exit |
(config)#interface fastEthernet 1/0 (config-if)#ip address 122.22.3.65 255.255.255.192 (config-if)#description connect to lan4 (config-if)#no shutdown (config-if)#exit |
loopback interface | |
(config)#interface loopback 1 (config-if)#ip address 122.22.3.129 255.255.255.224 (config-if)#description loopback1 (config-if)#exit |
(config)#interface loopback 2 (config-if)#ip address 122.22.3.161 255.255.255.240 (config-if)#description loopback2 (config-if)#exit |
serial interface | |
(config)#interface serial 2/0 (config-if)#ip address 122.22.3.177 255.255.255.252 (config-if)#clock rate 64000 (config-if)#description connect to r2 (config-if)#no shutdown (config-if)#exit |
(config)#interface serial 2/0 (config-if)#ip address 122.22.3.178 255.255.255.252 (config-if)#description connect to r1 (config-if)#no shutdown (config-if)#exit |
default route | |
(config)# ip route 0.0.0.0 0.0.0.0 s2/0 | |
backup configuration | |
(config)#copy running-config tftp Address or name of remote host []? 122.22.0.4 |
Assign an IP address and Subnet mask, Default gateway
Active suitable services
Configuring the DNS server:
Name | Type | Address |
bkacad.com | A Record | 122.22.3.67 |
ftp.test.com | A Record | 122.22.3.68 |
www.cisco.com | A Record | 122.22.0.2 |
www.test.com | A Record | 122.22.3.66 |
- Default Gateway: 122.22.2.1
- DNS Server: 122.22.0.3
- Start IP Address: 122.22.2.10
- Subnet Mask: 255.255.255.0
- Maximum number of users: 20
- TFTP Server: 122.22.0.4
- Domain name: bkacad.com
- Add users and passwords (user/pass):
- pc1/cisco
- pc4/cisco
PC | Email address | Incoming and Outgoing mail server | user | pass |
PC1 | pc1@bkacad.com | bkacad.com | pc1 | cisco |
PC4 | pc4@bkacad.com | bkacad.com | pc4 | cisco |
Configuring the PC client:
- PC0, PC1, PC2, PC3: Assign IP address, subnet mask, default gateway and DNS server address by DHCP server
- PC4, PC5, PC6: Manual assign IP address, subnet mask, default gateway and DNS
- Ping from pc2 to pc5 to test whether the network operates successfully.
- Ping from pc1 to ftp.test.com to check the connection to the ftp server.
- Ping from pc1 to TFTP server to check the connection to the TFTP server.
- Ping from pc1 to DNS to check whether the connection to the DNS server.
- Ping from pc1 to Web: www.cisco.com to check the connection to the Web server.
- Ping from pc1 to Web: www.test.com to check the connection to the Web server.
- Ping from pc1 to Mail: bkacad.com to check the connection to the Mail server.
Storage the file on the server
6.4.3.3 Packet trace lab answer
ReplyDeleteGreat Article
ReplyDeleteCyber Security Projects for CSE Students
JavaScript Training in Chennai
Project Centers in Chennai